Keyword Index

A

  • Adhesion Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]
  • Al-Basrah city Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Aluminum beam Shearography-Wavelet-Based Damage Detection Methodology for Aluminum Beams [Volume 11, Issue 4, 2023, Pages 22-43]
  • Analytical method Determining the Dynamic Settlement of the Foundation Adjacent to Slope Using Analytical Method [Volume 11, Issue 2, 2023, Pages 33-42]
  • Arch bridges Control of Road Settlement around Stone-Arch Bridges by Material Modification and Embankment [Volume 11, Issue 2, 2023, Pages 18-32]
  • Asphalt binder Laboratory Evaluation of Fatigue and Rutting Performance of Nano CaCO3 Modified Asphalt Binders [Volume 11, Issue 3, 2023, Pages 144-157]

B

  • Basalt Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan [Volume 11, Issue 1, 2023, Pages 96-110]
  • Basalt textile-reinforced concrete Experimental and Analytical Study on the Longitudinal Shear Bond Behaviour of Basalt Textile-Reinforced Concrete Composite Slab [Volume 11, Issue 4, 2023, Pages 91-121]
  • Beam Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement [Volume 11, Issue 1, 2023, Pages 43-59]
  • Bearing capacity Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Binder drainage An Investigation on the Mix Design of Double Layer Porous Asphalts [Volume 11, Issue 4, 2023, Pages 65-76]

C

  • Cantabro test An Investigation on the Mix Design of Double Layer Porous Asphalts [Volume 11, Issue 4, 2023, Pages 65-76]
  • Ceramic-industry wastewater Use of Ceramic-Industry Wastewater in Sandy Subgrade Stabilization by Deep Mixing Method [Volume 11, Issue 3, 2023, Pages 1-17]
  • Clay burnt brick Strength Comparison of Unreinforced Masonry Wall made of Different Types of Brick [Volume 11, Issue 4, 2023, Pages 160-177]
  • Composite A Comparative Experimental Study on the Flexural Behavior of Geopolymer Concrete Beams Reinforced with FRP Bars [Volume 11, Issue 1, 2023, Pages 21-42]
  • Composite shear wall Numerical Analysis of J-Hook Connectors’ Effect on the Performance of Steel-Concrete Composite Shear Walls [Volume 11, Issue 2, 2023, Pages 94-112]
  • Composite slab Experimental and Analytical Study on the Longitudinal Shear Bond Behaviour of Basalt Textile-Reinforced Concrete Composite Slab [Volume 11, Issue 4, 2023, Pages 91-121]
  • Compressive Strength The Relationship between Compressive Strength and Splitting Tensile Strength of high-Performance Fiber-Reinforced Cementitious Composites [Volume 11, Issue 4, 2023, Pages 1-21]
  • Concentrically Braced Frame Seismic Improvement and Rehabilitation of Steel Concentric Braced Frames: A Framework-Based Review [Volume 11, Issue 2, 2023, Pages 153-177]
  • Concrete Impact Resistance of Concrete Containing LLDPE–Waste Tire Rubber and Silica Fume [Volume 11, Issue 1, 2023, Pages 60-75]
  • Concrete pavement Evaluation of Mechanical Properties and Durability of Concrete Pavement Containing Electric Arc Furnace Slag and Carbon Nanostructures [Volume 11, Issue 1, 2023, Pages 1-20]
  • Concrete structures Soft Story Design of Reinforced Concrete Structures with Masonry Infill Walls [Volume 11, Issue 4, 2023, Pages 122-137]
  • Construction project management A Review of Successful Construction Project Managers’ Competencies and Leadership Profile [Volume 11, Issue 1, 2023, Pages 76-95]
  • Continuum Models A Review on Soil-Foundation-Interaction Models [Volume 11, Issue 3, 2023, Pages 158-179]
  • Corrosion An Innovative Approach to Estimate Chloride Diffusion Coefficient in Submerged Concrete Structures Using Soft Computing [Volume 11, Issue 3, 2023, Pages 88-106]
  • Crack mouth-opening displacement (CMOD) Flexural Properties of UHPFRC Beams with an Initial Notch [Volume 11, Issue 1, 2023, Pages 141-177]
  • Crack tip-opening displacement (CTOD) Flexural Properties of UHPFRC Beams with an Initial Notch [Volume 11, Issue 1, 2023, Pages 141-177]
  • Cyclic loading A Modeling Strategy for Predicting the Response of Steel Plate-Concrete Composite Walls [Volume 11, Issue 2, 2023, Pages 43-63]
  • Cyclic triaxial Evaluation of Dynamic Properties of Fiber Reinforced Sandy Soil at High Cyclic Strains [Volume 11, Issue 3, 2023, Pages 107-121]
  • Cylinder Numerical Analysis of the Transient Thermal Stress Intensity Factors in Cylinders Containing an External Circumferential Semi-Elliptical Crack [Volume 11, Issue 1, 2023, Pages 127-140]

D

  • Damage detection index Mode Shape-Based Damage Localization in Steel Plates Using a Detection Index Based on 2D Wavelet Analysis [Volume 11, Issue 4, 2023, Pages 44-64]
  • Damage identification Mode Shape-Based Damage Localization in Steel Plates Using a Detection Index Based on 2D Wavelet Analysis [Volume 11, Issue 4, 2023, Pages 44-64]
  • Damping ratio Evaluation of Dynamic Properties of Fiber Reinforced Sandy Soil at High Cyclic Strains [Volume 11, Issue 3, 2023, Pages 107-121]
  • Deep soil mixing Use of Ceramic-Industry Wastewater in Sandy Subgrade Stabilization by Deep Mixing Method [Volume 11, Issue 3, 2023, Pages 1-17]
  • Dome truss structures Reliability-Based Optimum Design of Dome Truss Structures through Enhanced Vibration Particle System [Volume 11, Issue 3, 2023, Pages 47-67]
  • Drainage System Quality Study on Drainage of Pavement Layers and Improvement Strategies: Case Study [Volume 11, Issue 1, 2023, Pages 111-126]
  • Drop weight Impact Resistance of Concrete Containing LLDPE–Waste Tire Rubber and Silica Fume [Volume 11, Issue 1, 2023, Pages 60-75]
  • Durability Evaluation of Mechanical Properties and Durability of Concrete Pavement Containing Electric Arc Furnace Slag and Carbon Nanostructures [Volume 11, Issue 1, 2023, Pages 1-20]
  • Durability Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan [Volume 11, Issue 1, 2023, Pages 96-110]

E

  • Effective damping Investigating Cyclic and Pushover Performance of Different Metallic Yielding Dampers [Volume 11, Issue 3, 2023, Pages 122-143]
  • Effective stiffness Investigating Cyclic and Pushover Performance of Different Metallic Yielding Dampers [Volume 11, Issue 3, 2023, Pages 122-143]
  • Element removal Macro Modeling of Column Removal in RC Frames with Consideration of Importance Factor and Infill Walls [Volume 11, Issue 2, 2023, Pages 64-93]
  • Embankment Control of Road Settlement around Stone-Arch Bridges by Material Modification and Embankment [Volume 11, Issue 2, 2023, Pages 18-32]
  • Ensemble Learning An Innovative Approach to Estimate Chloride Diffusion Coefficient in Submerged Concrete Structures Using Soft Computing [Volume 11, Issue 3, 2023, Pages 88-106]
  • Environment A Comparative Experimental Study on the Flexural Behavior of Geopolymer Concrete Beams Reinforced with FRP Bars [Volume 11, Issue 1, 2023, Pages 21-42]
  • Environmental safety Characteristics of Recycled Concrete Aggregate and its Implementation for Pavement Base Applications: A Review [Volume 11, Issue 2, 2023, Pages 131-152]
  • EVPS algorithms Reliability-Based Optimum Design of Dome Truss Structures through Enhanced Vibration Particle System [Volume 11, Issue 3, 2023, Pages 47-67]
  • External semi-elliptical circumferential crack Numerical Analysis of the Transient Thermal Stress Intensity Factors in Cylinders Containing an External Circumferential Semi-Elliptical Crack [Volume 11, Issue 1, 2023, Pages 127-140]

F

  • Fatigue Laboratory Evaluation of Fatigue and Rutting Performance of Nano CaCO3 Modified Asphalt Binders [Volume 11, Issue 3, 2023, Pages 144-157]
  • FEA method Numerical Analysis of J-Hook Connectors’ Effect on the Performance of Steel-Concrete Composite Shear Walls [Volume 11, Issue 2, 2023, Pages 94-112]
  • Fiber Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]
  • Finite element Prediction of the Punching Load Strength of SCS Slabs with Stud-Bolt Shear Connectors Using Numerical Modeling and GEP Algorithm [Volume 11, Issue 3, 2023, Pages 68-87]
  • Frog mark Strength Comparison of Unreinforced Masonry Wall made of Different Types of Brick [Volume 11, Issue 4, 2023, Pages 160-177]
  • FRP A Comparative Experimental Study on the Flexural Behavior of Geopolymer Concrete Beams Reinforced with FRP Bars [Volume 11, Issue 1, 2023, Pages 21-42]

G

  • Garnet Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan [Volume 11, Issue 1, 2023, Pages 96-110]
  • Geopolymer A Comparative Experimental Study on the Flexural Behavior of Geopolymer Concrete Beams Reinforced with FRP Bars [Volume 11, Issue 1, 2023, Pages 21-42]
  • GIS Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Gradation An Investigation on the Mix Design of Double Layer Porous Asphalts [Volume 11, Issue 4, 2023, Pages 65-76]

H

  • High-performance fiber-reinforced cement composite The Relationship between Compressive Strength and Splitting Tensile Strength of high-Performance Fiber-Reinforced Cementitious Composites [Volume 11, Issue 4, 2023, Pages 1-21]
  • HPFRCC The Relationship between Compressive Strength and Splitting Tensile Strength of high-Performance Fiber-Reinforced Cementitious Composites [Volume 11, Issue 4, 2023, Pages 1-21]

I

  • Impact Resistance Impact Resistance of Concrete Containing LLDPE–Waste Tire Rubber and Silica Fume [Volume 11, Issue 1, 2023, Pages 60-75]
  • Importance factor Macro Modeling of Column Removal in RC Frames with Consideration of Importance Factor and Infill Walls [Volume 11, Issue 2, 2023, Pages 64-93]
  • Improved Continuum Models A Review on Soil-Foundation-Interaction Models [Volume 11, Issue 3, 2023, Pages 158-179]
  • Improved Winkler Models A Review on Soil-Foundation-Interaction Models [Volume 11, Issue 3, 2023, Pages 158-179]
  • Improvement Strategies Study on Drainage of Pavement Layers and Improvement Strategies: Case Study [Volume 11, Issue 1, 2023, Pages 111-126]
  • Initial notch Flexural Properties of UHPFRC Beams with an Initial Notch [Volume 11, Issue 1, 2023, Pages 141-177]
  • In-plane cyclic loading In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [Volume 11, Issue 3, 2023, Pages 18-46]
  • ITS An Investigation on the Mix Design of Double Layer Porous Asphalts [Volume 11, Issue 4, 2023, Pages 65-76]

J

  • J-hook connector Numerical Analysis of J-Hook Connectors’ Effect on the Performance of Steel-Concrete Composite Shear Walls [Volume 11, Issue 2, 2023, Pages 94-112]

K

  • K-Nearest neighbors An Innovative Approach to Estimate Chloride Diffusion Coefficient in Submerged Concrete Structures Using Soft Computing [Volume 11, Issue 3, 2023, Pages 88-106]

L

  • Leadership A Review of Successful Construction Project Managers’ Competencies and Leadership Profile [Volume 11, Issue 1, 2023, Pages 76-95]
  • Longitudinal shear bond strength Experimental and Analytical Study on the Longitudinal Shear Bond Behaviour of Basalt Textile-Reinforced Concrete Composite Slab [Volume 11, Issue 4, 2023, Pages 91-121]

M

  • Machine made brick Strength Comparison of Unreinforced Masonry Wall made of Different Types of Brick [Volume 11, Issue 4, 2023, Pages 160-177]
  • Markov Chain An Innovative Approach to Estimate Chloride Diffusion Coefficient in Submerged Concrete Structures Using Soft Computing [Volume 11, Issue 3, 2023, Pages 88-106]
  • Masonry infill wall Soft Story Design of Reinforced Concrete Structures with Masonry Infill Walls [Volume 11, Issue 4, 2023, Pages 122-137]
  • Masonry Wall Strength Comparison of Unreinforced Masonry Wall made of Different Types of Brick [Volume 11, Issue 4, 2023, Pages 160-177]
  • Masonry walls In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [Volume 11, Issue 3, 2023, Pages 18-46]
  • Material effects Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Mechanical properties Characteristics of Recycled Concrete Aggregate and its Implementation for Pavement Base Applications: A Review [Volume 11, Issue 2, 2023, Pages 131-152]
  • Metallic Yielding dampers Investigating Cyclic and Pushover Performance of Different Metallic Yielding Dampers [Volume 11, Issue 3, 2023, Pages 122-143]
  • Micro-steel fiber Flexural Properties of UHPFRC Beams with an Initial Notch [Volume 11, Issue 1, 2023, Pages 141-177]
  • Modal curvature Shearography-Wavelet-Based Damage Detection Methodology for Aluminum Beams [Volume 11, Issue 4, 2023, Pages 22-43]
  • Modal rotation Shearography-Wavelet-Based Damage Detection Methodology for Aluminum Beams [Volume 11, Issue 4, 2023, Pages 22-43]
  • Mode shape Mode Shape-Based Damage Localization in Steel Plates Using a Detection Index Based on 2D Wavelet Analysis [Volume 11, Issue 4, 2023, Pages 44-64]
  • Modulus of elasticity Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Modulus of Subgrade Reaction A Review on Soil-Foundation-Interaction Models [Volume 11, Issue 3, 2023, Pages 158-179]
  • Moisture Intrusion Study on Drainage of Pavement Layers and Improvement Strategies: Case Study [Volume 11, Issue 1, 2023, Pages 111-126]
  • Monte Carlo simulation method Reliability-Based Optimum Design of Dome Truss Structures through Enhanced Vibration Particle System [Volume 11, Issue 3, 2023, Pages 47-67]
  • Mortar Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]

N

  • Nano Caco3 Laboratory Evaluation of Fatigue and Rutting Performance of Nano CaCO3 Modified Asphalt Binders [Volume 11, Issue 3, 2023, Pages 144-157]
  • Nano materials Application of nano materials in improving geotechnical properties of soils: A review study [Volume 11, Issue 4, 2023, Pages 138-159]
  • Nano silica Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan [Volume 11, Issue 1, 2023, Pages 96-110]
  • Non-prestressed Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement [Volume 11, Issue 1, 2023, Pages 43-59]
  • Numerical analysis Numerical Analysis of J-Hook Connectors’ Effect on the Performance of Steel-Concrete Composite Shear Walls [Volume 11, Issue 2, 2023, Pages 94-112]

O

  • OpenSees Macro Modeling of Column Removal in RC Frames with Consideration of Importance Factor and Infill Walls [Volume 11, Issue 2, 2023, Pages 64-93]
  • Optimization Reliability-Based Optimum Design of Dome Truss Structures through Enhanced Vibration Particle System [Volume 11, Issue 3, 2023, Pages 47-67]
  • Overstrength Factor Soft Story Design of Reinforced Concrete Structures with Masonry Infill Walls [Volume 11, Issue 4, 2023, Pages 122-137]

P

  • Passive devices Investigating Cyclic and Pushover Performance of Different Metallic Yielding Dampers [Volume 11, Issue 3, 2023, Pages 122-143]
  • Pavement Use of Ceramic-Industry Wastewater in Sandy Subgrade Stabilization by Deep Mixing Method [Volume 11, Issue 3, 2023, Pages 1-17]
  • Pavement Drainage Study on Drainage of Pavement Layers and Improvement Strategies: Case Study [Volume 11, Issue 1, 2023, Pages 111-126]
  • Pavement performance Study on Drainage of Pavement Layers and Improvement Strategies: Case Study [Volume 11, Issue 1, 2023, Pages 111-126]
  • Polymeric materials In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [Volume 11, Issue 3, 2023, Pages 18-46]
  • Polypropylene fiber Evaluation of Dynamic Properties of Fiber Reinforced Sandy Soil at High Cyclic Strains [Volume 11, Issue 3, 2023, Pages 107-121]
  • Porous asphalt An Investigation on the Mix Design of Double Layer Porous Asphalts [Volume 11, Issue 4, 2023, Pages 65-76]
  • Prestraining Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Pre-stress Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]
  • Problematic soils Application of nano materials in improving geotechnical properties of soils: A review study [Volume 11, Issue 4, 2023, Pages 138-159]
  • Project manager A Review of Successful Construction Project Managers’ Competencies and Leadership Profile [Volume 11, Issue 1, 2023, Pages 76-95]
  • Project success A Review of Successful Construction Project Managers’ Competencies and Leadership Profile [Volume 11, Issue 1, 2023, Pages 76-95]
  • Pull-off Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]
  • Pushdown analysis Macro Modeling of Column Removal in RC Frames with Consideration of Importance Factor and Infill Walls [Volume 11, Issue 2, 2023, Pages 64-93]
  • Push-over Analysis Numerical Analysis of J-Hook Connectors’ Effect on the Performance of Steel-Concrete Composite Shear Walls [Volume 11, Issue 2, 2023, Pages 94-112]

R

  • Raft foundation A Review on Soil-Foundation-Interaction Models [Volume 11, Issue 3, 2023, Pages 158-179]
  • Rebar Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement [Volume 11, Issue 1, 2023, Pages 43-59]
  • Recycled concrete aggregate Characteristics of Recycled Concrete Aggregate and its Implementation for Pavement Base Applications: A Review [Volume 11, Issue 2, 2023, Pages 131-152]
  • Rehabilitation Seismic Improvement and Rehabilitation of Steel Concentric Braced Frames: A Framework-Based Review [Volume 11, Issue 2, 2023, Pages 153-177]
  • Reinforced Concrete Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement [Volume 11, Issue 1, 2023, Pages 43-59]
  • Reinforced sand Evaluation of Dynamic Properties of Fiber Reinforced Sandy Soil at High Cyclic Strains [Volume 11, Issue 3, 2023, Pages 107-121]
  • Rheology Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan [Volume 11, Issue 1, 2023, Pages 96-110]
  • Rubber Impact Resistance of Concrete Containing LLDPE–Waste Tire Rubber and Silica Fume [Volume 11, Issue 1, 2023, Pages 60-75]
  • Rutting Laboratory Evaluation of Fatigue and Rutting Performance of Nano CaCO3 Modified Asphalt Binders [Volume 11, Issue 3, 2023, Pages 144-157]

S

  • Sandy Subgrade Use of Ceramic-Industry Wastewater in Sandy Subgrade Stabilization by Deep Mixing Method [Volume 11, Issue 3, 2023, Pages 1-17]
  • Seismic design Soft Story Design of Reinforced Concrete Structures with Masonry Infill Walls [Volume 11, Issue 4, 2023, Pages 122-137]
  • Seismic Improvement Seismic Improvement and Rehabilitation of Steel Concentric Braced Frames: A Framework-Based Review [Volume 11, Issue 2, 2023, Pages 153-177]
  • Seismic isolation In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [Volume 11, Issue 3, 2023, Pages 18-46]
  • Semi-macro model A Modeling Strategy for Predicting the Response of Steel Plate-Concrete Composite Walls [Volume 11, Issue 2, 2023, Pages 43-63]
  • Shallow foundation Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Shear modulus Evaluation of Dynamic Properties of Fiber Reinforced Sandy Soil at High Cyclic Strains [Volume 11, Issue 3, 2023, Pages 107-121]
  • Shearography method Shearography-Wavelet-Based Damage Detection Methodology for Aluminum Beams [Volume 11, Issue 4, 2023, Pages 22-43]
  • Silica Fume Impact Resistance of Concrete Containing LLDPE–Waste Tire Rubber and Silica Fume [Volume 11, Issue 1, 2023, Pages 60-75]
  • Size effect Flexural Properties of UHPFRC Beams with an Initial Notch [Volume 11, Issue 1, 2023, Pages 141-177]
  • Slip Experimental and Analytical Study on the Longitudinal Shear Bond Behaviour of Basalt Textile-Reinforced Concrete Composite Slab [Volume 11, Issue 4, 2023, Pages 91-121]
  • Slope topography effect Determining the Dynamic Settlement of the Foundation Adjacent to Slope Using Analytical Method [Volume 11, Issue 2, 2023, Pages 33-42]
  • Smeared crack model A Modeling Strategy for Predicting the Response of Steel Plate-Concrete Composite Walls [Volume 11, Issue 2, 2023, Pages 43-63]
  • Soft story Soft Story Design of Reinforced Concrete Structures with Masonry Infill Walls [Volume 11, Issue 4, 2023, Pages 122-137]
  • Soft-story Seismic Improvement and Rehabilitation of Steel Concentric Braced Frames: A Framework-Based Review [Volume 11, Issue 2, 2023, Pages 153-177]
  • Soil improvement Application of nano materials in improving geotechnical properties of soils: A review study [Volume 11, Issue 4, 2023, Pages 138-159]
  • Soil stiffness Determining the Dynamic Settlement of the Foundation Adjacent to Slope Using Analytical Method [Volume 11, Issue 2, 2023, Pages 33-42]
  • SPT Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Square Hollow Section Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Stabilization Characteristics of Recycled Concrete Aggregate and its Implementation for Pavement Base Applications: A Review [Volume 11, Issue 2, 2023, Pages 131-152]
  • Steel-concrete-steel Slab Prediction of the Punching Load Strength of SCS Slabs with Stud-Bolt Shear Connectors Using Numerical Modeling and GEP Algorithm [Volume 11, Issue 3, 2023, Pages 68-87]
  • Steel faceplate A Modeling Strategy for Predicting the Response of Steel Plate-Concrete Composite Walls [Volume 11, Issue 2, 2023, Pages 43-63]
  • Steel Frame In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis [Volume 11, Issue 3, 2023, Pages 18-46]
  • Steel plate Mode Shape-Based Damage Localization in Steel Plates Using a Detection Index Based on 2D Wavelet Analysis [Volume 11, Issue 4, 2023, Pages 44-64]
  • Steel-plate composite shear wall A Modeling Strategy for Predicting the Response of Steel Plate-Concrete Composite Walls [Volume 11, Issue 2, 2023, Pages 43-63]
  • Steel structures Investigating Cyclic and Pushover Performance of Different Metallic Yielding Dampers [Volume 11, Issue 3, 2023, Pages 122-143]
  • Strain ageing. Finite element Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Strength properties Application of nano materials in improving geotechnical properties of soils: A review study [Volume 11, Issue 4, 2023, Pages 138-159]
  • Stress intensity factors Numerical Analysis of the Transient Thermal Stress Intensity Factors in Cylinders Containing an External Circumferential Semi-Elliptical Crack [Volume 11, Issue 1, 2023, Pages 127-140]
  • Stress Relief Annealed Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Strip footing Determining the Dynamic Settlement of the Foundation Adjacent to Slope Using Analytical Method [Volume 11, Issue 2, 2023, Pages 33-42]
  • Support Vector Machine An Innovative Approach to Estimate Chloride Diffusion Coefficient in Submerged Concrete Structures Using Soft Computing [Volume 11, Issue 3, 2023, Pages 88-106]

T

  • Tendon Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement [Volume 11, Issue 1, 2023, Pages 43-59]
  • The Bauschinger Effect Material Effects on Tangent Modulus of Steel Square Hollow Section [Volume 11, Issue 2, 2023, Pages 1-17]
  • Thematic maps Production Thematic Maps of Bearing Capacity of Shallow Foundation for Al-Basrah Soil Using Standard Penetration Data and GIS [Volume 11, Issue 4, 2023, Pages 77-90]
  • Three-dimensional finite element method Numerical Analysis of the Transient Thermal Stress Intensity Factors in Cylinders Containing an External Circumferential Semi-Elliptical Crack [Volume 11, Issue 1, 2023, Pages 127-140]
  • Transient thermal stress Numerical Analysis of the Transient Thermal Stress Intensity Factors in Cylinders Containing an External Circumferential Semi-Elliptical Crack [Volume 11, Issue 1, 2023, Pages 127-140]
  • Twist-off Bond Strength of Fiber-Reinforced Mortar and Concrete Interface under Pre-Stress [Volume 11, Issue 2, 2023, Pages 113-130]

U

W

  • Wavelet Transform Shearography-Wavelet-Based Damage Detection Methodology for Aluminum Beams [Volume 11, Issue 4, 2023, Pages 22-43]